Explore this Article
Steps
Steps
Other Sections
Video
Things You'll Need
Related Articles
Expert Interview
References
Co-authored byVictor Belavus
Last Updated: May 24, 2023References
A thermostat turns your furnace and air conditioner on or off depending on the temperature in the room and the setting on the thermostat. Programmable and standard thermostats are installed the same way. A new or improved thermostat can help increase energy efficiency when running your furnace or air conditioner. Use these tips to wire a thermostat.
Steps
1
Read the manufacturer's instructions. Before wiring a new thermostat into your wall, review all tips, suggestions and pictures provided in the instructions. Take heed to any special directions given for your particular model.
2
Turn the electricity off to the thermostat. Flip the switches at the breaker box that corresponds to your furnace and air conditioner. Turning the electricity off helps to avoid any electrical problems or injuries.[1]
Advertisement
3
See AlsoInspectApedia Diagnose & Fix What's Wrong at Your BuildingA Full Guide To HVAC Thermostat Wiring (With Diagrams)What All Those Letters Mean on Your Thermostat’s WiringDecoding Thermostat Wiring Colors: Essential Guide for DIY InstallationTake down the old thermostat and wall plate. The thermostat will usually slide up to come off the wall plate. Loosen and remove the screws that hold the wall plate in place.[2]
4
Keep track of how the wires are connected to the back of your old thermostat.
- Label or make note of which wires were connected to the letter designations on the old thermostat. If there are stray wires that are not connected to anything, label those, too.[3]
- Disregard the colors, except for your own labeling and referral purposes. While professional installations are usually color-coded, not all thermostats were wired by professionals originally.[4]
5
Keep the wires from falling back into the wall. Tie or bundle the wires together. If they still won't stay in place, tape them to the wall.[5] Wires that fall back into the wall must be fished out in order to complete the wiring installation.
6
Put up the replacement wall plate, if there is one. Mark new holes to match the holes in the wall plate. Use a level to ensure that the wall plate is straight.[6] Drill the holes for the new plate. Screw the new plate onto the wall.
7
Connect the wires from the wall to the thermostat. Refer to your labels or the notes you made to connect them correctly.[7] Twist the wires to the connectors on the back of the thermostat or follow the directions provided with the manufacturer's instructions.
8
Attach the thermostat face to the new wall plate. Push all wires back into the wall, and slide the plate onto the wall plate. It should sit flush against the wall and be straight.
9
Turn the electricity back on to the furnace and air conditioner. Flip the switches in your breaker box to restore the electricity to the items.[8]
10
Test the thermostat by causing the furnace and air conditioner to come on at various temperatures. Review all steps if the thermostat fails to work.
Advertisement
Community Q&A
Search
Question
What is the name and size of the wire?
Community Answer
18-gauge wire would be needed to carry 24 volts, with red being the power wire and white being the common wire.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 0Helpful 0
Question
Will the thermostat have the markings as to where each color wire goes?
Isaac
Community Answer
Thermostats always have labeling on the terminals, such as R,Y, G. These refer to the colors red, yellow and green. Make sure the same color wire is landed on the same spot at both the furnace and thermostat for proper function.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 2Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Advertisement
Video
Things You'll Need
- Drill
- Level
- Screwdriver
You Might Also Like
Advertisement
Expert Interview
Thanks for reading our article! If you’d like to learn more about heating and cooling, check out our in-depth interview with Victor Belavus.
References
About this article
Co-authored by:
Victor Belavus
Air Conditioning Specialist
This article was co-authored by Victor Belavus. Victor Belavus is an Air Conditioning Specialist and the Owner of 212 HVAC, an air condition repair and installation company based in Brooklyn, New York. In addition to HVAC and air conditioning units, Victor also specializes in furnace repair and air duct cleaning. He has over 10 years of experience working with HVAC systems. This article has been viewed 56,344 times.
3 votes - 67%
Co-authors: 6
Updated: May 24, 2023
Views:56,344
Thanks to all authors for creating a page that has been read 56,344 times.
Did this article help you?
Advertisement
